Advanced TFR
From £9.00
Traffic film remover concentrate for vehicle exteriors, colourless and odourless, and classified non hazardous under GB-CLP. Use it neat or dilute up to 1:5. Five sizes, 1L to 1000L, from £9.00.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size |
1L ,5L ,25L ,210L ,1000L |
Advanced TFR is a traffic film remover concentrate for washing vehicle exteriors. It’s alkaline at pH 12.85, colourless and odourless, so there’s no dye to mark light paint and nothing left hanging in an enclosed bay. Use it neat, or dilute up to 1:5 in warm water. The same blend runs from 1L to 1000L.
Features and benefits
- Neat through to 1:5. One product covers the whole range, so you’re not stocking two strengths.
- Colourless and odourless. No dye to stain light paint or trim, and no perfume left in the bay.
- Non hazardous under GB-CLP. No pictogram, no signal word and no hazard statements on the container.
- No wax and no rinse aid. For gloss and beading from the same wash, that’s Advanced TFR with wax, which is a separate product.
Specification
| Product type | Alkaline vehicle-exterior detergent concentrate (traffic film remover) |
|---|---|
| Format | Liquid concentrate |
| Appearance | Colourless liquid |
| Odour | Odourless |
| pH (as supplied) | 12.85 |
| Dilution | Neat, or up to 1:5 with warm water |
| Relative density (water = 1) | 1.009 |
| Solubility in water | >99.8% |
| Flash point | >250°C |
| Flammability | Not flammable |
| GB-CLP classification | Non hazardous. No pictogram, signal word or hazard statement. |
| Storage container | Polyethylene or polypropylene |
| Pack sizes | 1L, 5L, 25L, 210L, 1000L |
| SKU | FEMCH106 |
Directions for use
If needed, carefully dispense liquid into a smaller container suitable for your intended application.
- Use neat or dilute the product up to 1 part product to 5 parts water in a bucket with warm water.
- To apply the product, spray evenly over the vehicle starting with lower areas.
- Do not allow to dry
- Rinse with plenty of clean, high pressure water.
| Strength | Ratio |
|---|---|
| Neat | Undiluted |
| Diluted | Up to 1:5, product to water, in warm water |
That’s the whole range. There’s no light, general and heavy-duty ladder for this one. Test on an inconspicuous area first. In warm weather, don’t let it dry on the panel before you rinse.
Safety and ingredients
Advanced TFR is classified non hazardous under GB-CLP, so there’s no pictogram, signal word or hazard statement to display. It’s a detergent, not a disinfectant, and it carries no hygiene claim. Use it in a well-ventilated area, wear protective clothing where there’s a risk of exposure, and wash your hands with soap and water afterwards.
CAUTION: Contact with eyes and skin should be avoided. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Wash with plenty of water. If medical advice is needed, have product container or label at hand. Do not use for medical or hygiene purposes. Do not mix with any other preparations. Do not ingest. If product is ingested, then seek medical advice. Always test on an inconspicuous area prior to use and only proceed when satisfied with the results. Rinse hands after use.
READ LABEL BEFORE USE KEEP AWAY FROM CHILDREN AND ANIMALS WHILE USING AND IN STORAGE.
Contains amongst other ingredients: <5% non-ionic surfactants, <5% phosphates
Documents
Safety data sheet available on request. Email Emma at emma@emchem.co.uk.
Great for: fleet and HGV wash bays, vans and commercial vehicles, valeting work, and the car on the drive.
See the full Traffic Film Remover (TFR) range. Wheels want a different chemistry, so pair it with acid-free wheel cleaner, and put snow foam on first to lift the loose grit.












Reviews
There are no reviews yet.