Name: Snow foam
SKU: FEMCH079
Availability: InStock

Snow foam

From £5.99

Snow foam pre-wash for a lance and pressure washer. The dense foam clings to paintwork and lifts dirt, grime, grease and tar before the contact wash, so less grit meets your mitt. 1L to 1000L.

Weight

N/A

Dimensions

N/A

Size

25L

210L

1000L

Snow foam for the pre-wash stage, from Emchem in North Wales. It’s dense enough to cling to vertical panels rather than running straight off, so it stays on the dirt long enough to loosen it. Grease, grime and tar rinse away, so less grit reaches the paint.

Features and benefits

Dense, clinging foam. It holds on vertical panels instead of sliding off, so it stays on the soil while it dwells.
Lifts dirt, grime, grease and tar. The loose grit rinses away before your mitt touches the paint.
Non-flammable. The care it needs is around contact with skin and eyes, not fire.
Five sizes, 1L to 1000L. The same blend on a driveway and in a fleet wash bay.
Fully CLP-labelled. WARNING signal word, GHS07 pictogram and hazard wording on the container, so the hazard information is on the pack rather than in a separate document.
It’s a pre-wash, not a wash. It cuts what the contact wash has to shift, and it won’t replace that stage. Keep it off aluminium, and test an inconspicuous area first.

Specification

Product type	Vehicle pre-wash foam, applied through a snow foam lance
Surfactant system	Non-ionic, amphoteric and anionic surfactants, with perfume
Format	Liquid
Colour	Straw
Miscibility	Miscible with water
Flammability	Non-flammable
Stability	Stable in normal conditions of use and storage
Equipment needed	Pressure washer with a snow foam lance
Not for use on	Aluminium
Pack sizes	1L, 5L, 25L, 210L, 1000L. 25L and above are supplied on quotation, not buyable online.
Pack weight	1L: 1.2kg. 5L: 5.5kg
SKU	FEMCH079 (1L), FEMCH080 (5L), FEMCH081 (25L), FEMCH082 (210L), FEMCH083 (1000L)

Directions for use

Pour content directly into foam lance bottle of your pressure washer
Spray an even layer over the vehicle, covering it completely (TIP: Spray from the bottom up to ensure optimal contact time).
Allow the snow foam to dwell for several minutes but do not allow the product to dry out
Jet wash the entire vehicle with clean water
Prepare the vehicle for contact wash stage.

No dilution rate is stated for this product.

Safety and ingredients

Classified Eye Irrit. 2. Signal word: Warning. H319 Causes serious eye irritation. The GHS07 pictogram is printed on the pack.

CAUTION: Causes skin irritation. Causes serious eye irritation. Contact with eyes and skin should be avoided. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Wash with plenty of water. If medical advice is needed, have product container or label at hand. Do not use for medical or hygiene purposes. Do not mix with any other preparations. Do not ingest. If product is ingested, then seek medical advice. Always test on an inconspicuous area prior to use and only proceed when satisfied with the results. Rinse hands after use.

READ LABEL BEFORE USE KEEP AWAY FROM CHILDREN AND ANIMALS WHILE USING AND IN STORAGE.

Contains amongst other ingredients: <5% non-ionic surfactants, <5% amphoteric surfactants, <5% anionic surfactants, perfume. Contains: (C12-14) alkyldimethyl-amine. oxide

Safety data sheet available on request. Email Emma at emma@emchem.co.uk.

Great for: valeting bays, mobile valeting, fleet and van wash bays, weekend car washing at home.

The rest of the snow foam and car shampoo range sits alongside this one, and Premium Vehicle Shampoo handles the contact wash that follows. A car wash grid keeps rinsed-off grit out of the mitt. For heavy traffic film, a traffic film remover (TFR) is the stronger route.