Traffic Film Remover

From £5.99

Traffic film remover (TFR) concentrate for cars, vans, HGVs, trailers and farm machinery. It foams to lift road film and grime, works in hot or cold water and in hard water areas, and goes on by hand or through a pressure washer.

Weight N/A
Dimensions N/A
Size

1L

,

5L

,

25L

,

1000L

SKU: N/A Category:
Description

Traffic film remover (TFR) concentrate for cars, vans, HGVs, trailers and farm machinery. Diluted into warm water, it foams up to lift the greasy road film off the bodywork, then rinses off with clean water. It works hot or cold and in hard water, so you don’t need a hot wash bay to get a result.

Features and benefits

  • Rich foam. It expands into crevices, so you agitate and rinse the dirt out rather than chase it.
  • Works hot or cold. No hot wash needed, which matters on a farm yard or an unheated transport park.
  • Copes with hard water. The phosphate builder ties up calcium and magnesium, so the surfactant isn’t wasted forming scum.
  • Hand wash or pressure washer. One concentrate covers a bucket-and-brush wash and a lance.
  • Not classified as corrosive. It carries GHS07 and the signal word WARNING, not the corrosive pictogram. Contact with eyes and skin should still be avoided.

Specification

Product typeLiquid concentrate, diluted before use
Active typeAnionic surfactants, with an aliphatic hydrocarbon solvent and a phosphate builder
Directions for mixing5 parts water and 1 part product, into a bucket of warm water
Water temperatureHot or cold
ApplicationBy hand, or through a pressure washer
Hazard classificationSignal word WARNING, exclamation mark pictogram (GHS07). Not classified as corrosive
Pack sizes1L, 5L, 25L, 1000L IBC
Pack weights1L 1.2kg, 5L 5.5kg
Availability1L and 5L online. 25L and 1000L supplied to order (quote required)

Directions for use

  1. Pour 5 parts water and 1 part product into a bucket of warm water.
  2. Wash entire vehicle, but do not allow to dry.
  3. Rinse off with plenty of clean water.

There’s one mix, no light or heavy tier to weigh up. Test on an inconspicuous area first and only carry on once you’re satisfied.

This is a bodywork wash. Brake dust wants a wheel cleaner, and bonded deposits want a bug, glue and tar remover. It leaves no wax or protection behind, so follow with wax or paint protection if the vehicle needs it.

Safety and ingredients

This is a cleaning product, not a disinfectant.

WARNING:
Causes skin irritation. Causes serious eye irritation. Contact with eyes and skin should be avoided. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Wash with plenty of water. If medical advice is needed, have product container or label at hand. Do not use for medical or hygiene purposes. Do not mix with any other preparations. Do not ingest. If product is ingested, then seek medical advice. Always test on an inconspicuous area prior to use and only proceed when satisfied with the results. Rinse hands after use

Contains amongst other ingredients: <5% aliphatic hydrocarbons, <5% anionic surfactants, <5% phosphates

READ LABEL BEFORE USE KEEP AWAY FROM CHILDREN AND ANIMALS WHILE USING AND IN STORAGE.

Great for: automotive, farming, boating, industrial and general cleaning.

Not sure what dilution suits your setup? Email Emma at emma@emchem.co.uk. There are six more products in the traffic film remover range, including versions with wax.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Traffic Film Remover”

Your email address will not be published. Required fields are marked *